|
TOBI SignalServer
0.1
|
|
TOBI SignalServer
0.1
|
| tobiss::_CHANNEL | |
| tobiss::_DAC | |
| tobiss::_DigitalIO | |
| tobiss::_DigitalOUT | |
| tobiss::_FILT | |
| tobiss::_GND | |
| tobiss::_GT_DEVICEINFO | |
| tobiss::_REF | |
| tobiss::_SCALE | |
| tobiss::ArtificialSignalSource | A base class providing basic functionallity for artificial signal creation |
| tobiss::SerialPortBase::AsioSerialPortTypeNames | |
| tobiss::BrainAmpSeries | |
| tobiss::DataBuffer< T >::buffer_overrun | |
| tobiss::DataBuffer< T >::buffer_underrun | |
| tobiss::DataBuffer< T > | Thread safe FIFO buffer |
| tobiss::DataFileHandler | |
| DataPacketReader | |
| tobiss::DataQ | This class is used to gain access to DataQ DAQ devices |
| tobiss::DataQWrapper | Wrapper class |
| tobiss::di_anin_struct | |
| tobiss::di_info_struct | |
| tobiss::di_info_struct32 | |
| tobiss::di_inlist_struct | |
| tobiss::di_mode_struct | |
| tobiss::di_outlist_struct | |
| tobiss::EEGSimMsgParser::EEGConfig | Simple struct holding parameters to configure the EEG signal |
| EEGConfig | Simple struct holding parameters to configure the EEG signal |
| tobiss::EEGSimMsgParser | |
| tobiss::EEGSimulator | A class to simulate EEG signals |
| tobiss::EventListener | A temporary class used to inject events into the signal server |
| tobiss::FileReader | |
| tobiss::FileReaderFactory | |
| tobiss::gBSamp | This class is used to gain access to PCMCIA-cards |
| tobiss::gBSampBase | |
| tobiss::GdfFileReader | |
| tobiss::GMobilab | This class is used to gain access to g.tec g.Mobilab |
| tobiss::GTECUSBampWrapper | Wrapper class |
| Handpoint | A class using IPC to receive handpoint data from a motion sensing system |
| tobiss::HWAccess | Class gathering access to connected hardware |
| tobiss::HWThread | Base class for all hardware objects |
| tobiss::HWThreadBuilder | Builder base class for HWThreads... it provides a factory method |
| tobiss::HWThreadBuilderTemplateRegistrator< T > | A template for the HWThreadBuilder which also registrates concrete builders in the HWThreadFactory |
| tobiss::HWThreadBuilderTemplateRegistratorWithoutIOService< T > | A template for the HWThreadBuilder which also registrates concrete builders in the HWThreadFactory |
| tobiss::HWThreadFactory | A factory for HWThreads |
| tobiss::JStick | A class using SDL to access generic joysticks |
| tobiss::KinectShmReader | |
| tobiss::SerialPortBase::AsioSerialPortTypeNames::MapValue | |
| tobiss::Mouse | Class to connected mouse devices |
| tobiss::MouseBase | Base class to connected mouse devices |
| nidaqmx::NIDaqmxWrapper | Wrapper class |
| tobiss::NIRScout | |
| tobiss::SampleBlock< T > | A container storing and sorting samples directly acquired from a data acquisition device |
| tobiss::SerialPortBase | This class wrapps boost::asio::serial_port |
| tobiss::KinectShmReader::shared_memory_struct | |
| tobiss::SignalServer | |
| tobiss::EEGSimMsgParser::SineConfig | Simple struct holding parameters to configure the sine waves |
| SineConfig | Simple struct holding parameters to configure the sine waves |
| tobiss::SineGenerator | A dummy hardware device for simulation and testing purposes |
| tobiss::Statistics | Class to calculate various (univariate) runtime statistics |
| tobiss::tagCODASHDR | |
| TiAClientDataReader | |
| tobiss::USBamp | A class to wrap the API provided by g.tec for the g.USBamp and enable synchronous and asynchronous data access |
| tobiss::XMLParser | Class holding a xml document and doing basic xml parsing |
1.7.6.1 
